1.perintah
yang digunakan untu mengatur ip address (Eth 0 tersambung dengan ethernet,Eth 1
tersambung dengan LAN
Pertama
kita ketikkan pada root Nano /etc/network/interfaces
lalu tekan enter untuk masuk ke root yang telah kita masukkan perintah
tertentu.
·
Ip static
Auto eth 0
Iface eth 0 inet static
Address 192.168.1.44
Netmask 255.255.255.224
Network 192.168.1.32
Broadcast 192.168.1.63
Gateway 192.168.133
·
Dhcp
Auto eth 0
Iface eth0 inet dhcp
Eth1 auto eth1 inet static
Address 10.10.10.1
Netmask 255.255.255.0
Network 10.10.10.0
Broadcast 10.10.10.255
2.restart
networketc/in
/it.d/networking
restart
3.aktifkan
ip forward
Echo 1 > /proc/sys/net/ipv4/ip_forward
Nano /etc/sysctl.confic
Net.ipv4.foeward=1
4.masukan
perintah ip tablles untuk meneruskan eth0 ke eth 1
Nano /etc/rc.loca
Tuliskan
kode sebelum exit
Iptables –t nat -A POSTROUTING-o eth0
–j MASQUERADE
5.melakukan
re-start pada komputer
Shutdown –r now
6.mematikan
komputer
Shutdown
–h now
Tidak ada komentar:
Posting Komentar